Introduction
This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides here.
Use this guide to replace the ultra wideband adhesive in your Google Pixel Fold following a repair.
Follow this guide to remove the ultra wideband antenna, if you haven't done so already.
What you need
-
-
Look at the bottom of the antenna and note where the adhesive is located.
-
-
-
Use tweezers, or your fingers, to remove the old adhesive strips.
-
-
-
-
Apply the adhesive strips to their respective spots on the antenna.
-
Use a spudger, or your fingers, to press down the adhesive and adhere it to the antenna.
-
-
-
Grip the pull tabs and peel off the blue liners to expose the adhesive.
-
-
-
Reconnect the ultra wideband antenna press connector.
-
Align the antenna so its top sits against the thermal insulator.
-
Use a spudger, or your fingers, to press down the antenna and adhere it.
-
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Google Pixel Fold Answers Community for help.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Google Pixel Fold Answers Community for help.
