Introduction
This repair guide was authored by the iFixit staff and hasn’t been endorsed by Google. Learn more about our repair guides here.
Use this guide to replace the top speaker adhesive in your Google Pixel Fold following a repair.
Follow this guide to remove the top speaker, if you haven't done so already.
What you need
-
-
Use tweezers, or your fingers, to peel off the adhesive strip from the top speaker.
-
Peel off the new adhesive strip from its liner.
-
-
-
-
Place the new adhesive on the top speaker.
-
Use a spudger, or your fingers, to press down the adhesive and adhere it to the speaker.
-
Use tweezers, or your fingers, to pull on the tab and expose the top layer of adhesive.
-
-
-
Insert the top speaker at a shallow angle into its recess in the frame.
-
Push the speaker towards the top edge of the phone until it sits flat in the frame.
-
Push down on the speaker to adhere it to the frame.
-
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Google Pixel Fold Answers Community for help.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Google Pixel Fold Answers Community for help.
