Skip to main content

How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes

What you need

  1. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes, How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: step 1, image 1 of 1
    • You will see a cable attached to an Allen bolt.

  2. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: step 2, image 1 of 1
    • Loosen up the bolt with the help of Hex key set.

  3. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: step 3, image 1 of 2 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: step 3, image 2 of 2
    • Now, pull the cable as much as you can.

  4. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: step 4, image 1 of 1
    • Tighten up the bolt while you keep pulling the cable.

  5. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: step 5, image 1 of 2 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: step 5, image 2 of 2
    • To center the caliper for a smooth breaking experience, loosen up the two bolts of the brake situated at top and at bottom.

  6. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: step 6, image 1 of 1
    • Now, put the brake on.

  7. How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: step 7, image 1 of 3 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: step 7, image 2 of 3 How to Adjust Tektro Aries MD-M300 Mechanical Disc Brakes: step 7, image 3 of 3
    • While putting the brake on, tighten up both the bolts.

    • You are finished adjusting the brakes!

Finish Line

2 other people completed this guide.

Md Abdullah

Member since: 07/03/21

201 Reputation

1 Guide authored

One Comment

Dude, the cable is attached incorrectly. The cable routes up and over the little arm.

Grandy - Reply

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 51

Past 30 Days: 225

All Time: 4,199