QMR hooks are attached to the hardback panel with two thread plates. Occasionally, the screws can come loose from this thread plate and become lost. We’ll show you how you can easily replace the thread plates if this happens.
Slightly lift the hardback panel using a screwdriver and push the thread place underneath.
Adjust the thread plate in the middle of the groove.
Lift the thread plate with the screwdriver so that the screw from the QMR hook can catch the thread.
Position the QMR hook on the thread plate. Attach the screw to the thread plate using the orange knob.
Special thanks to these translators:
These translators are helping us fix the world! Want to contribute?
Start translating ›
Embed this guide
Choose a size and copy the code below to embed this guide as a small widget on your site / forum.