Introduction

LED daytime running lights are a great add-on to any vehicle to increase light output for style and safety. Some LED daytime lamps are vehicle specific, but this set of Philips Style LED DRL is universal fit for more cars and SUVs.

Image 1/1:
  • Insert the wire into the bracket.

Add Comment

Image 1/1:
  • Mount the bracket. Since this is universal fit, you can mount it anywhere you'd like.

Add Comment

Image 1/1:
  • After mounting the bracket, you can lock the LED daytime running light on the bracket.

Add Comment

Image 1/2: Use zip ties to tie the wire along the bumper. Image 2/2: Use zip ties to tie the wire along the bumper.
  • Connect the wires and route the wires up and near the fuse box.

  • Use zip ties to tie the wire along the bumper.

Add Comment

Image 1/2: You can find the ACC location using an electronic meter by clamping the black wire to the battery negative or ground. Image 2/2: When you find ACC, tap the red wires to the blade of the fuse and insert it back.
  • Find the ACC in your fuse box and tap the red wire there.

  • You can find the ACC location using an electronic meter by clamping the black wire to the battery negative or ground.

  • When you find ACC, tap the red wires to the blade of the fuse and insert it back.

Add Comment

Image 1/1:
  • Tap the black wire to battery negative.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Test to make sure everything works and enjoy your new universal fit Philips Style LED Daytime Running Lights.

Add Comment

Conclusion

As you can see, installation isn't complicated and if you follow the directions accordingly, you'll be on your way to new LED daytime running lights in no time.

8 other people completed this guide.

Eric Wu

Member since: 01/21/2015

1,990 Reputation

23 Guides authored

View Statistics:

Past 24 Hours: 54

Past 7 Days: 385

Past 30 Days: 1,339

All Time: 25,818