Fix Your Stuff Community Store

Hover-1 Superstar Bottom Case Replacement

Introduction

In order to access the internal components of the Hover-1 Superstar, the bottom case must first be unscrewed and removed. This guide will explain the process of removing the bottom case from the Hover-1 Superstar.

What you need

  1. Hover-1 Superstar Bottom Case Replacement, Bottom Case: step 1, image 1 of 3 Hover-1 Superstar Bottom Case Replacement, Bottom Case: step 1, image 2 of 3 Hover-1 Superstar Bottom Case Replacement, Bottom Case: step 1, image 3 of 3

    • Flip your Hover-1 Superstar device upside down.

    • Using a Phillips #1 screwdriver, remove all twenty of the 18mm screws holding the case onto the device.

    • Remove the bottom case. Be careful of the connector holding the case and the device together.

    Edit

  3. Hover-1 Superstar Bottom Case Replacement: step 2, image 1 of 1

    • Locate the cable connected to the front lights.

    • Pull apart the wires until the black clip separates.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 355