Skip to main content

Hover-1 Matrix Right Gyroscope Sensor Board Replacement

What you need

  1. Hover-1 Matrix Right Gyroscope Sensor Board Replacement, Right Gyroscope Sensor Board: step 1, image 1 of 3 Hover-1 Matrix Right Gyroscope Sensor Board Replacement, Right Gyroscope Sensor Board: step 1, image 2 of 3 Hover-1 Matrix Right Gyroscope Sensor Board Replacement, Right Gyroscope Sensor Board: step 1, image 3 of 3
    • Locate and use the screw driver and 54 bit as shown in figure 3. Use screw driver to remove screws on the back of the hover board as shown in figure 1. Remove the back shell as shown in figure 2.

  2. Hover-1 Matrix Right Gyroscope Sensor Board Replacement: step 2, image 1 of 2 Hover-1 Matrix Right Gyroscope Sensor Board Replacement: step 2, image 2 of 2
    • Locate green electric boards at both ends of the hover board. These green boards are the gyroscopes. Use the screw driver to remove the screws from the corners of the green boards as shown in figure 1.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Qingxi Liu

Member since: 10/22/18

85 Reputation

1 Guide authored

Team

UC Davis, Team S7-G2, Lore Fall 2018 Member of UC Davis, Team S7-G2, Lore Fall 2018

UCD-LORE-F18S7G2

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 8

All Time: 427