Fix Your Stuff Community Store

Hover-1 Coast Wheel Replacement

Introduction

If you are ever in the situation where any of your Coast wheels are needed to be replaced don't hesitate replacing them. This does not require any difficult steps but it is important for your safety along with others around you.

What you need

  1. Hover-1 Coast Wheel Replacement, Wheel: step 1, image 1 of 1

    • Identify the wheel you are wanting to replace.

    Edit

  2. Hover-1 Coast Wheel Replacement: step 2, image 1 of 2 Hover-1 Coast Wheel Replacement: step 2, image 2 of 2

    • Find the Socket wrench located in the Hover-1 Coast packaging.

    • Use the 9/16 inch side to loosen the skateboard nut by turning counterclockwise.

    Edit

  4. Hover-1 Coast Wheel Replacement: step 3, image 1 of 3 Hover-1 Coast Wheel Replacement: step 3, image 2 of 3 Hover-1 Coast Wheel Replacement: step 3, image 3 of 3

    • Remove the nut off the axle.

    • Remove the washer off the axle.

    Edit

  5. Hover-1 Coast Wheel Replacement: step 4, image 1 of 3 Hover-1 Coast Wheel Replacement: step 4, image 2 of 3 Hover-1 Coast Wheel Replacement: step 4, image 3 of 3

    • To avoid losing any parts, place them on a flat surface.

    • Slide the unwanted wheel off the axle.

    • Slide the new wheel on the axle.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 2

All Time: 409