Fix Your Stuff Community Store

Hover-1 Chrome Disassembly

Introduction

If you need to access the internals of your Hover-1, or want to replace the case, use this guide. It will show you how to remove the case. You will need a Phillips #2 screwdriver.

What you need

  1. Hover-1 Chrome Disassembly, Hover-1 Chrome Disassembly: step 1, image 1 of 1

    • Flip the Hover-1 Chrome upside down.

    • Use a Phillips #2 screwdriver to remove the fourteen 14 mm screws from the bottom of the Hover-1.

    • Break the two black tape circles, and remove the two 15 mm Phillips screws underneath.

    Edit

  3. Hover-1 Chrome Disassembly: step 2, image 1 of 1

    • Lift the shell without the speaker grille and unplug the battery.

    Edit

  4. Hover-1 Chrome Disassembly: step 3, image 1 of 2 Hover-1 Chrome Disassembly: step 3, image 2 of 2

    • Lift the shell with the speaker grille.

    • Unplug the speaker.

    • Unplug the LEDs.

    • Unplug the power button

    • Unplug the charging port.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 4 other contributors

Craig Belshe

Member since: 10/08/18

103 Reputation

1 Guide authored

Badges: 3

Team

Cal Poly, Team S4-G1, White Fall 2018 Member of Cal Poly, Team S4-G1, White Fall 2018

CPSU-WHITE-F18S4G1

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 8

Past 30 Days: 22

All Time: 1,061