Introduction

Follow this guide to replace the camera in the Hott T725-8G.

  1. Carefully remove the black electrical tape connecting the motherboard to the ribbon wire.
    • Carefully remove the black electrical tape connecting the motherboard to the ribbon wire.

  2. Use a pair of Precision Tweezers to squeeze the clip of the ribbon wire to release it.
    • Use a pair of Precision Tweezers to squeeze the clip of the ribbon wire to release it.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Using a pair of the Precision Tweezers, remove the ribbon wire from the clip.
    • Using a pair of the Precision Tweezers, remove the ribbon wire from the clip.

  5. Gently dislodge the camera using the Metal Spudger.  The camera is now ready to be replaced.
    • Gently dislodge the camera using the Metal Spudger. The camera is now ready to be replaced.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Emma Carroll

Member since: 10/20/2016

193 Reputation

5 Guides authored

Team

UMass Dartmouth, Team 6-2, Martin Fall 2016 Member of UMass Dartmouth, Team 6-2, Martin Fall 2016

UMASSD-MARTIN-F16S6G2

3 Members

11 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 53