Danger
Potentially Dangerous
Injury may result if this procedure is not followed properly. Use caution and follow all warnings.
Danger

Introduction

This guide will walk you through replacing the battery in your Hott T725-8G.

Image 1/1:
  • Remove the yellow tape holding the wire connecting the battery to the motherboard with your fingers.

Add Comment

Image 1/1:
  • Use your fingers to separate the ribbon wire from the battery and the back of the display.

Add Comment

Image 1/1:
  • Use your fingers to remove more yellow tape holding down the wire connecting the battery to the motherboard.

Add Comment

Image 1/1:
  • You can check one of the connection points between the battery and the motherboard to see if it is firmly connected (which it should be) using the plastic Spudger. It is not necessary to remove this wire to replace the battery.

Add Comment

Image 1/1: Avoid using metal when working with batteries.
  • Use a Plastic Spudger to separate the adhesive side of the battery from the back of the display.

    • Avoid using metal when working with batteries.

  • The adhesive is extremely sticky, but will separate. Ensure that the battery doesn't bend or fold while removing it.

Add Comment

Image 1/1:
  • You may use the plastic Spudger to separate the connections between the battery and motherboard. The new battery is now ready to be soldered on.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Emma Carroll

Member since: 10/20/2016

163 Reputation

5 Guides authored

Team

UMass Dartmouth, Team 6-2, Martin Fall 2016 Member of UMass Dartmouth, Team 6-2, Martin Fall 2016

UMASSD-MARTIN-F16S6G2

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 10

All Time: 84