Fix Your Stuff Community Store

Hot Wheels AI Intelligent Race System Controller Batteries Replacement

Introduction

If your Hot Wheels AI controller does not turn, try replacing the battery. This guide will assist you if you have any trouble. Before you begin, you will need three brand new AAA batteries and a J0 screwdriver. The steps should be straightforward and fast! Once you replace your battery, you will be racing in no time!

What you need

  1. Hot Wheels AI Intelligent Race System Controller Batteries Replacement, Controller Batteries: step 1, image 1 of 1

    • Use a JIS #0 screwdriver to unscrew the single battery cover screw.

    Edit

  3. Hot Wheels AI Intelligent Race System Controller Batteries Replacement: step 2, image 1 of 2 Hot Wheels AI Intelligent Race System Controller Batteries Replacement: step 2, image 2 of 2

    • Remove the old AAA battery from the slot by pressing down on the positive end.

    • Do the same for the other two. Make sure none of the battery slots are damaged.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 285