Fix Your Stuff Community Store

Hoover Windtunnel Air Steerable Upright Belt Replacement

Introduction

Damaged belt may be the reason for the vacuum not picking up debris properly. This guide will show you how to open the bottom plate of the machine and replace the belt underneath.

What you need

  1. Hoover Windtunnel Air Steerable Upright Belt Replacement, Belt: step 1, image 1 of 3 Hoover Windtunnel Air Steerable Upright Belt Replacement, Belt: step 1, image 2 of 3 Hoover Windtunnel Air Steerable Upright Belt Replacement, Belt: step 1, image 3 of 3

    • Unplug power cord before you begin.

    • Remove the 4 phillips 3/4'' screws.

    Edit

  2. Hoover Windtunnel Air Steerable Upright Belt Replacement: step 2, image 1 of 2 Hoover Windtunnel Air Steerable Upright Belt Replacement: step 2, image 2 of 2

    • Lift off the plate.

    Edit

  4. Hoover Windtunnel Air Steerable Upright Belt Replacement: step 3, image 1 of 2 Hoover Windtunnel Air Steerable Upright Belt Replacement: step 3, image 2 of 2

    • Separate the belt from the brush roll.

    Edit

  5. Hoover Windtunnel Air Steerable Upright Belt Replacement: step 4, image 1 of 3 Hoover Windtunnel Air Steerable Upright Belt Replacement: step 4, image 2 of 3 Hoover Windtunnel Air Steerable Upright Belt Replacement: step 4, image 3 of 3

    • Remove the belt from the gear.

    Edit
Conclusion

To reassemble your device, follow these steps in reverse order.

Author

with 2 other contributors

Sangmin Jung

Member since: 09/26/17

201 Reputation

2 Guides authored

Badges: 4

+1 more badge

Team

Cal Poly, Team S7-G2, Banghart Fall 2017 Member of Cal Poly, Team S7-G2, Banghart Fall 2017

CPSU-BANGHART-F17S7G2

5 Members

14 Guides authored

One Comment

That isn’t the steering belt. That is the agitator belt.

Lynn Brown - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 17

All Time: 1,465