Introduction
This guide demonstrates how to remove or replace the recoil starter assembly on your Honda EB3000CK2A 3000 Watt Generator.
What you need
-
-
-
Use a 10 mm socket to remove the three 12 mm-long bolts securing the recoil starter assembly.
-
Remove the recoil starter assembly.
-
-
-
Use a 10 mm socket to remove the two 20 mm-long bolts securing the recoil starter pulley.
-
Remove the recoil starter pulley.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
