Skip to main content

Free Shipping on Domestic Orders $75+

HomePod Mini Speaker Replacement

Views: 4.4K

View statistics:

Past 24 Hours:
11
Past 7 Days:
97
Past 30 Days:
330
All Time:
4,434
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 0

No one has marked this guide "completed." Will you be the first?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: 35 - 55 minutes
Difficulty: Moderate
Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide's procedures crystal clear.

Community-Contributed Guide

An awesome member of our community made this guide. It was not created by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

HomePod Mini Speaker Replacement

What you need

Parts

Tools

      • Turn the HomePod mini upside down

      • Peel back the foot covers

      Ask FixBot

      Add Comment

      • Carefully cut the fabric mesh using the fabric scissors

      • Be very careful not to scratch the delicate glass surface on top!

      Ask FixBot

      Add Comment

      • Unscrew the 4 torx screws on the bottom near the speaker holes

      Ask FixBot

      Add Comment

      • Carefully separate the top and middle sections from the HomePod mini

      • Be very careful when separating, as there are cables connected to the motherboard as well as the speakers

      • Carefully unplug all the cables connected to the motherboard

      Ask FixBot

      Add Comment

      • Carefully separate the middle section of the HomePod mini

      Ask FixBot

      Add Comment

      • Carefully remove the speaker driver from the bottom part of the HomePod mini

      • Be very careful not to damage the delicate ribbon cable below the driver!

      Ask FixBot

      Add Comment

      • Remove the speaker driver

      • Carefully remove the cables connecting to the driver, being careful not to damage it

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

776831

Member since: 06/10/21

1,067 Reputation

8 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 11

Past 7 Days: 97

Past 30 Days: 330

All Time: 4,434