Introduction

Holmes HEH8031 Circuit Board Removal Replacement

Ensure the device is unplugged from the wall outlet.
  • Ensure the device is unplugged from the wall outlet.

Add Comment

Remove eight 12-mm Phillips #2 screws from the back cover.
  • Remove eight 12-mm Phillips #2 screws from the back cover.

Add Comment

  • Turn heater over so the controls are facing up.

  • Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.

  • Internal wires are connected to both halves of the housing. Be careful when separating the housing.

Add Comment

  • Remove four 12mm Phillips #2 screws from the circuit board.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Deanna Jack

Member since: 10/12/2016

297 Reputation

4 Guides authored

Team

IUPUI, Team 2-1, Baechle Fall 2016 Member of IUPUI, Team 2-1, Baechle Fall 2016

IUPUI-BAECHLE-F16S2G1

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 64