Introduction
The speakers provide sound for the projector. If the sound is muffled or distorted, the speakers might be at fault. If you've determined that the speakers of your Hitachi CP-X2010N projector have failed, follow this guide to replace them.
Before handling the speakers, ensure the device is powered off and unplugged. Also make sure that the projector has cooled off if it has recently been used, as it could become warm after prolonged use.
What you need
-
-
-
Pinch the edges of the two connectors and carefully disconnect both wires from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.