Introduction

Replacing the speakers is simple enough. All that is required is a plastic pry tool and a few

minutes of time. It is recommended to perform this procedure in a will-lit area, as there is not

much contrast between many of the components on this device.

Parts

No parts required.

Turn tablet off before dissembling it.
  • Turn tablet off before dissembling it.

  • Use caution when handling device if screen is cracked.

  • Using a plastic opening tool, pry open the back cover from the tablet.

  • An extra set of hands may be required.

Add Comment

Use a spudger to disconnect the battery from the motherboard.
  • Use a spudger to disconnect the battery from the motherboard.

Add Comment

  • Using a plastic opening tool, carefully place under one corner of the battery.

  • Move around edges of the battery to lift it off of the tablet.

  • Remove battery from tablet.

Add Comment

  • Peel back the film holding the speaker wire in place

  • Detach both wire connectors

Add Comment

  • Using a plastic opening tool, carefully place under one corner of each speaker

  • Remove both speakers

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Logan Phillips

Member since: 05/09/2017

101 Reputation

1 Guide authored

Team

IUPUI, Team S4-G1, Harley Spring 2017 Member of IUPUI, Team S4-G1, Harley Spring 2017

IUPUI-HARLEY-S17S4G1

4 Members

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 36