Introduction

This speaker replacement guide will enumerate the steps to remove necessary components in order to get to the speaker. Replacing the speaker is a moderate three step process using the necessary tools.

Use the plastic opening tools to pry the screen from the back of the device. Gently flip the back over without damaging the wire connecting the speaker to the rest of the device.
  • Use the plastic opening tools to pry the screen from the back of the device.

  • Gently flip the back over without damaging the wire connecting the speaker to the rest of the device.

Add Comment

Use Spudger to remove speaker from back casing of the device.
  • Use Spudger to remove speaker from back casing of the device.

Add Comment

Use Soldering Iron to heat up the ends of wires connecting the speaker to the motherboard until they come free. Remove the speaker from the device.
  • Use Soldering Iron to heat up the ends of wires connecting the speaker to the motherboard until they come free.

  • Remove the speaker from the device.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Kari Cannon

Member since: 10/30/2015

488 Reputation

4 Guides authored

Team

UMass Dartmouth, Team 1-1, Miles Fall 2015 Member of UMass Dartmouth, Team 1-1, Miles Fall 2015

UMASSD-MILES-F15S1G1

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 71