Introduction

This camera replacement guide demonstrates how to remove the necessary components to access the camera. Replacing the camera is a simple four step process using the necessary tools.

Use the plastic opening tools to pry open the back case of the device. Use the plastic opening tools to pry open the back case of the device.
  • Use the plastic opening tools to pry open the back case of the device.

Add Comment

Use spudger to remove the speaker from the back casing of the device.
  • Use spudger to remove the speaker from the back casing of the device.

Add Comment

Use tweezers to remove the black adhesive strips from the wires. Set aside
  • Use tweezers to remove the black adhesive strips from the wires. Set aside

Add Comment

Use a spudger to undo the black clip connecting the camera wires to the motherboard. Use a spudger to undo the black clip connecting the camera wires to the motherboard. Use a spudger to undo the black clip connecting the camera wires to the motherboard.
  • Use a spudger to undo the black clip connecting the camera wires to the motherboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Kari Cannon

Member since: 10/30/2015

488 Reputation

4 Guides authored

Team

UMass Dartmouth, Team 1-1, Miles Fall 2015 Member of UMass Dartmouth, Team 1-1, Miles Fall 2015

UMASSD-MILES-F15S1G1

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 70