Introduction
Here are the steps you'll need to replace the headband of you Headset. Make sure that you have a thin screwdriver.
What you need
-
-
With one hand near the ear pad and the other hand on the headband, extend the headband to gain access to the screws.
-
Use a Phillips #0 screwdriver to remove the two screws.
-
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Team
UMass Dartmouth, Team 1-1, Petersen Fall 2022 Member of UMass Dartmouth, Team 1-1, Petersen Fall 2022
UMASSD-PETERSEN-F22S1G1
5 Members
3 Guides authored
