Head Strap Info - iFixit Repair Guide

Free Shipping on Domestic Orders $75+

Introduction

This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.

What you need

1. Step 1 Head strap removal information
  The head strap can be removed without removing the face gasket bezel if you have the correct length driver. If you are using your iFixit T6 driver, skip this step and proceed with removing the face gasket bezel.
  
  Your T6 driver must have a shaft longer than 18 mm (0.7 in) and an overall length less than 140 mm (5.5 in).
  
  Insert your T6 Torx screwdriver into the hole on the face gasket bezel to remove the captive screw securing the left side of the head strap.
  
  Skip to step 12.
  Edit
  
  Ask FixBot
  
  Add Comment
  
  1024

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

Sam Omiotek

Member since: 02/25/19

100,791 Reputation

289 Guides authored

+33 more badges

0 Guide Comments

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 15

All Time: 174