Skip to main content

Fix Your Stuff

Right to Repair

Store

You're viewing a previously published version of this guide.  View latest version

Older Newer
  1. Remove the stickers covering the screws. These are located on both corners of the screen. (Two in total) Remove the two 7mm screws.
    • Remove the stickers covering the screws. These are located on both corners of the screen. (Two in total)

    • Remove the two 7mm screws.

  2. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Shop Kits

    Enough RAM
    For All The Tabs

    Shop Kits
  3. Use a plastic opening tool to pull the plastic screen bezel forward. Remove the 4 7mm screws in the corners holding the screen up. Use a plastic oping tool to pry the screen forward. Lay it on the keyboard.
    • Use a plastic opening tool to pull the plastic screen bezel forward.

    • Remove the 4 7mm screws in the corners holding the screen up.

    • Use a plastic oping tool to pry the screen forward. Lay it on the keyboard.

  4. Peel off the tape that connects the chord to the screen. Carefully unplug chord.
    • Peel off the tape that connects the chord to the screen.

    • Carefully unplug chord.

Desiree Mora

Member since: 02/14/2018

289 Reputation

3 Guides authored

Team

USF Tampa, Team S6-G6, Eyestone Spring 2018 Member of USF Tampa, Team S6-G6, Eyestone Spring 2018

USFT-EYESTONE-S18S6G6

3 Members

6 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 142