Skip to main content

Introduction

The only tool needed is a #00 Phillips Screw driver.

Parts

No parts specified.

  1. Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.
    • Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.

  2. Remove the black plate from the PDA.
    • Remove the black plate from the PDA.

  3. MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now

    MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now
  4. Remove four 2.6 mm Philips screws that are on the sides of the frame. Remove the remaining 3.9 mm Philips screw holding together the stylus holster and the frame.
    • Remove four 2.6 mm Philips screws that are on the sides of the frame.

    • Remove the remaining 3.9 mm Philips screw holding together the stylus holster and the frame.

  5. Remove the four 2.6 mm Philips screws on the top and bottom of the frame. Remove the four 2.6 mm Philips screws on the top and bottom of the frame.
    • Remove the four 2.6 mm Philips screws on the top and bottom of the frame.

  6. Remove the white frame from the PDA.
    • Remove the white frame from the PDA.

    • The frame may get stuck on the corners so be very gentle when working the corners off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Nick Lazarakis

Member since: 01/23/2011

334 Reputation

3 Guides authored

Team

Cal Poly, Team 11-28, Maness Winter 2011 Member of Cal Poly, Team 11-28, Maness Winter 2011

CPSU-MANESS-W11S11G28

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 912