Fix Your Stuff Community Store

Hamilton G5 Rear Panel-Metal Shield Disassembly

Medical Equipment
Neither iFixit nor this repair guide is endorsed by or affiliated with the medical device manufacturer.

Introduction

This guide will show you how to remove and replace the rear cover and the metal shield of the Hamilton G5 ventilator. For more information on replacing the rear cover and metal shield, please check section 9-24 in the service manual.

What you need

  1. Hamilton G5 Rear Panel-Metal Shield Disassembly, Hamilton G5 Rear Panel-Metal Shield Disassembly: step 1, image 1 of 1

    • Remove the screw (A) and washer(B) and remove the cable management cover (C).

    Edit

  2. Hamilton G5 Rear Panel-Metal Shield Disassembly: step 2, image 1 of 1

    • Remove the 4 screws (D) to remove the panel's swivel mount (E).

    Edit

  3. Hamilton G5 Rear Panel-Metal Shield Disassembly: step 3, image 1 of 1

    • Remove the 6 screws (F) and remove the back panel (G).

    Edit

  4. Hamilton G5 Rear Panel-Metal Shield Disassembly: step 4, image 1 of 1

    • Remove the 5 screws and remove the metal shield.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Dane Dormedy

Member since: 04/08/20

349 Reputation

3 Guides authored

Badges: 3

Team

Cal Poly, Team S7-G25, Paton Spring 2020 Member of Cal Poly, Team S7-G25, Paton Spring 2020

CPSU-PATON-S20S7G25

6 Members

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 6

All Time: 120