Introduction

Replacement of the drive gears. Do not remove grease as it helps the gears move smoothly.

Turn the bowl counterclockwise and lift. Turn the bowl counterclockwise and lift.
  • Turn the bowl counterclockwise and lift.

Add Comment

Use the nylon spudger to remove  the plastic screw covers. Use the nylon spudger to remove  the plastic screw covers.
  • Use the nylon spudger to remove the plastic screw covers.

Add Comment

Using a #2 Phillips head screwdriver, remove the four 10 mm screws and pull the shaft straight upwards to uncover gears. Using a #2 Phillips head screwdriver, remove the four 10 mm screws and pull the shaft straight upwards to uncover gears. Using a #2 Phillips head screwdriver, remove the four 10 mm screws and pull the shaft straight upwards to uncover gears.
  • Using a #2 Phillips head screwdriver, remove the four 10 mm screws and pull the shaft straight upwards to uncover gears.

Add Comment

Firmly grasp center piece of gear mechanism and pull straight upward. Firmly grasp center piece of gear mechanism and pull straight upward.
  • Firmly grasp center piece of gear mechanism and pull straight upward.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Angel

Member since: 02/02/2017

201 Reputation

2 Guides authored

Team

USF Tampa, Team 17-4, Blackwell Spring 2017 Member of USF Tampa, Team 17-4, Blackwell Spring 2017

USFT-BLACKWELL-S17S17G4

3 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 52