Introduction

Before starting, you should be sure to unplug the coffee maker. Also, me sure to empty all contents before making any repairs.

Parts

No parts required.

Image 1/1:
  • This is what the bottom cover will look like. Flip the Brew Station upside down to easily access the screws.

Add Comment

Image 1/3: Using the Crown Bolt #8 Steel Spanner, unscrew the two 8-mm screws labeled in a orange outline. Image 2/3: Using the Crown Bolt #8 Steel Spanner, unscrew the two 8-mm screws labeled in a orange outline. Image 3/3: Using the Crown Bolt #8 Steel Spanner, unscrew the two 8-mm screws labeled in a orange outline.
  • Using the Philips 2 Screwdriver, unscrew the three 8-mm screws labeled in a red outline.

  • Using the Crown Bolt #8 Steel Spanner, unscrew the two 8-mm screws labeled in a orange outline.

Add Comment

Image 1/1:
  • Carefully slide off the bottom drip tray by sliding it out away from the Brew Station.

Add Comment

Image 1/1:
  • Gently lift the base away from the Brew Station.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Michael Damico

Member since: 02/10/2016

601 Reputation

6 Guides authored

Team

USF Tampa, Team 14-1, Lacy Spring 2016 Member of USF Tampa, Team 14-1, Lacy Spring 2016

USFT-LACY-S16S14G1

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 9

All Time: 121