Parts

No parts required.

  1. Take the back cover off the phone and take the battery out.
    • Take the back cover off the phone and take the battery out.

    Add Comment

  2. Take a SL#2.5 screwdriver and pop the black piece off shown here.
    • Take a SL#2.5 screwdriver and pop the black piece off shown here.

    Add Comment

    • Take a T5 screwdriver and unscrew the two screws seen here

    Add Comment

    • Unscrew the two screws on the back of the phone with a T5 screwdriver

    Add Comment

    • Take the SL#2.5 screwdriver and pry off the back cover

    • The phone should now look like the second picture

    Add Comment

    • Next lift up the camera lens from the board.

    • Then pry off the circuit circled in red on the second picture

    Add Comment

    • Take the SL#2.5 screwdriver and pry off the volume buttons on the side of the phone

    • The circuit board should now be detached from the LCD part of the phone

    Add Comment

    • Next take the SL#2.5 screwdriver and pry the grey fabric sticker off on the LCD side of the phone

    Add Comment

    • Next take the SL#2.5 screwdriver and pry the screen from the front plastic cover

    • The screen should come out with ease and be completely detached from the rest of the cover.

    Add Comment

    • Replace screen with a new one.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Meuwissenm

Member since: 10/04/2011

16 Reputation

1 Guide authored

Team

UW Stout, Team 5-3, Zhou Fall 2011 Member of UW Stout, Team 5-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G3

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,344