Parts

No parts required.

  1. Take the back cover off the phone and take the battery out.
    • Take the back cover off the phone and take the battery out.

    Add Comment

  2. Take a SL#2.5 screwdriver and pop the black piece off shown here
    • Take a SL#2.5 screwdriver and pop the black piece off shown here

    Add Comment

    • Take a T5 screwdriver and unscrew the two screws seen here

    Add Comment

    • Unscrew the two screws on the back of the phone with a T5 screwdriver

    Add Comment

    • Take the SL#2.5 screwdriver and pry off the back cover

    • The phone should now look like the second picture

    Add Comment

    • Take the SL#2.5 screwdriver and lift up the white connector at the top right corner of the phone on the side with the circuit board

    Add Comment

    • Next lift up the camera lens from the board.

    • It should now look like the second picture

    • Then lift up the circuit circled in red on the second picture

    Add Comment

    • Take the SL#2.5 screwdriver and pry off the volume buttons on the side of the phone

    • The circuit board should now be detached from the LCD part of the phone

    Add Comment

    • Next take the SL#2.5 screwdriver and pry the buttons off the phone and replace with the new ones

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Caitlin Bruce

Member since: 10/04/2011

23 Reputation

1 Guide authored

Team

UW Stout, Team 5-3, Zhou Fall 2011 Member of UW Stout, Team 5-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G3

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 723