Image 1/1:
  • Tools Needed: 1. Safety pry tool (guitar pick), 2. Tweezers, 3. Phillips Screwdriver, 4. Star tip Precision Screwdriver, 5. Flathead Screwdriver

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Use your safety pry tool on the outside edges of the back casing to lift and remove it

Add Comment

Image 1/2: Image 2/2:
  • Take your flathead and stick it into the holes to the left of the lens and carefully work your way around the perimeter pushing up the lens until it snaps off

Add Comment

Image 1/2: Place replacement lens over the camera lens and it should loosely snap on Image 2/2: Info*: Don’t worry if the cover is loose because the cover of the phone would hold it in place
  • Remove old lens.

  • Place replacement lens over the camera lens and it should loosely snap on

  • Info*: Don’t worry if the cover is loose because the cover of the phone would hold it in place

Add Comment

Image 1/1:
  • Snap the cover back into place

Add Comment

Finish Line

2 other people completed this guide.

Victoria

Member since: 10/23/2014

85 Reputation

3 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 247