Introduction

In addition to the possibility that the battery may be the reason why your phone is not charging, the charging port may also need to be replaced or tightened if loose. Ensure that the delicate parts of the phone revealed in the replacement procedure.

Parts

No parts required.

  1. Use the plastic opening tool to pry off back cover by inserting opening tool in the space indicated and pushing down on the handle of the tool.
    • Use the plastic opening tool to pry off back cover by inserting opening tool in the space indicated and pushing down on the handle of the tool.

  2. Remove the battery after taking off the cover.
    • Remove the battery after taking off the cover.

    • Remove eight 4mm and one 5mm Torx screws.

    • Use a prying tool to pry off the midframe.

    • Remove the 4mm Torx screw holding the charging port to the phone.

    • Remove the silver bracket holding the charging port in place.

    • Use a prying tool to remove the charging port as shown.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Tevin

Member since: 09/24/2014

639 Reputation

4 Guides authored

Team

USF Tampa, Team 15-1, Remmell Fall 2014 Member of USF Tampa, Team 15-1, Remmell Fall 2014

USFT-REMMELL-F14S15G1

4 Members

4 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 619