Skip to main content

Introduction

All phones have an antenna in them, this is what allows us to make phone calls and get signals from cell-phone towers. These fixes are generally easy, because the antennas are just small, paper-looking strips that are glued somewhere in or on the chassis of the phone.

  1. Remove the four 1.2mm screws in the corners to release the front of the phone from the back, then pry it off with the plastic opening tool.
    • Remove the four 1.2mm screws in the corners to release the front of the phone from the back, then pry it off with the plastic opening tool.

  2. PC Laptop Batteries

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Shop Now

    PC Laptop Batteries

    Batteries for all the top PC brands, backed by our Quality Guarantee.

    Shop Now
  3. Remove the back of the phone from the front.
    • Remove the back of the phone from the front.

  4. Use a spudger to gently lift one side of the antenna strip up, then pull it off. This needs to be done in all four corners.
    • Use a spudger to gently lift one side of the antenna strip up, then pull it off. This needs to be done in all four corners.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Eric Blackstock

Member since: 10/24/2018

379 Reputation

2 Guides authored

Team

UMASSD-PEAK-F18S3G2 Member of UMASSD-PEAK-F18S3G2

Community

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 13

All Time: 129