Introduction
This guide is used when the speakers are damaged or do not produce sound. You will need to use a little bit of force to remove the speakers from the tablet.
What you need
-
-
-
Using a Torx T4 screwdriver, remove the four 5 mm screws on the back panel.
Ask FixBot
-
-
-
Insert the tip of a plastic opening tool in the seam between the front and back panels.
-
-
-
-
Slide the plastic opening tool around all edges of the device until the back panel detaches.
-
Lift off the back panel.
-
-
-
-
Tool used on this step:Tweezers$4.99
-
Using tweezers or your fingers, disconnect the two speaker cables by pulling them free of the socket connectors.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
University of Alabama, Team S1-G1, Bedsole Spring 2019 Member of University of Alabama, Team S1-G1, Bedsole Spring 2019
UA-BEDSOLE-S19S1G1
4 Members
72 Guides authored
