Introduction

Following this guide step by step will allow you to install a new battery.

Image 1/3: Take the back cover off by pressing on the small silver button while pulling back then up on the case. Image 2/3: Place the back of the case aside for now. Image 3/3: Place the back of the case aside for now.
  • Flip the HP iPAQ HW6515 over with the screen facing down.

  • Take the back cover off by pressing on the small silver button while pulling back then up on the case.

  • Place the back of the case aside for now.

Add Comment

Image 1/1:
  • Remove the battery by pulling up on the black tab.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Tim

Member since: 04/03/2012

88 Reputation

2 Guides authored

Team

Cal Poly, Team 15-17, Forte Spring 2012 Member of Cal Poly, Team 15-17, Forte Spring 2012

CPSU-FORTE-S12S15G17

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 1,133