Introduction

This is a guide to opening your HP Touchsmart 600 Desktop PC and replacing the hard drive.

  1. Remove Phillips screw to remove plate in back of monitor.
    • Remove Phillips screw to remove plate in back of monitor.

  2. Remove 4 Phillips head screws and lift metal plate covering hard drive
    • Remove 4 Phillips head screws and lift metal plate covering hard drive

    • Remove screw above metal lever on hard drive.

    • Lift metal lever up and pull hard drive out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

10 other people completed this guide.

Barrington Edman

Member since: 07/10/2012

973 Reputation

3 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 3

Past 7 Days: 23

Past 30 Days: 82

All Time: 6,348