Tools

No tools required.

Parts

No parts required.

Use your nail or a spudger to pry up the back cover of the device.
  • Use your nail or a spudger to pry up the back cover of the device.

Add Comment

Slide your finger around the rest of the back cover, lifting it completely off of the device.
  • Slide your finger around the rest of the back cover, lifting it completely off of the device.

Add Comment

Remove all ten of the screws on the inside cover using the screwdriver with a PH00 Phillips head.
  • Remove all ten of the screws on the inside cover using the screwdriver with a PH00 Phillips head.

Add Comment

Pry up the inside cover the same way as in the first step.
  • Pry up the inside cover the same way as in the first step.

Add Comment

Remove the two speakers at the bottom of the device using tweezers. Remove the two speakers at the bottom of the device using tweezers.
  • Remove the two speakers at the bottom of the device using tweezers.

Add Comment

The power wires are soldered to the board. They must be disconnected, and the replacement speakers re-soldered.
  • The power wires are soldered to the board. They must be disconnected, and the replacement speakers re-soldered.

  • For soldering help, check out iFixit's How to Solder and Desolder Connections guide.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Nick Miller

Member since: 04/11/2016

661 Reputation

6 Guides authored

Team

Cal Poly, Team 34-14, Maness Spring 2016 Member of Cal Poly, Team 34-14, Maness Spring 2016

CPSU-MANESS-S16S34G14

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 107