Fix Your Stuff Join the Community Store

HP Stream 13-c110nr USB/Card Reader Board Replacement

Introduction

The USB/SD card reader repair guide will assist the user in removal and installation for the HP Stream 13-c110nr.

What you need

  1. HP Stream 13-c110nr USB/Card Reader Board Replacement, Top Cover/Keyboard: step 1, image 1 of 1

    • Close the device.

    • Remove AC adapter plug from electrical outlet.

    • Remove AC adapter from device.

    • Turn the device off.

    • Unplug all external devices from device.

    • If you are unsure whether the computer is off or in hibernation mode, start the computer and then shutdown the operating system.

    Edit

  2. HP Stream 13-c110nr USB/Card Reader Board Replacement: step 2, image 1 of 1

    • Turn the device upside down with the back facing towards you.

    Edit

  3. HP Stream 13-c110nr USB/Card Reader Board Replacement: step 3, image 1 of 3 HP Stream 13-c110nr USB/Card Reader Board Replacement: step 3, image 2 of 3 HP Stream 13-c110nr USB/Card Reader Board Replacement: step 3, image 3 of 3

    • Use a pick to remove the two (2) large computer feet along the back edge of the device.

    • Use a pick to remove the two (2) small computer feet.

    • Use a pick to remove the one (1) screw cover.

    • Place rubber computer feet in safe place for reassembly.

    Edit

  4. HP Stream 13-c110nr USB/Card Reader Board Replacement: step 4, image 1 of 3 HP Stream 13-c110nr USB/Card Reader Board Replacement: step 4, image 2 of 3 HP Stream 13-c110nr USB/Card Reader Board Replacement: step 4, image 3 of 3

    • Remove the thirteen (13) Phillips P0 PM2.5x6.0 mm screws.

    • Place the thirteen (13) screws on magnetic mat for reassembly.

    Edit

  5. HP Stream 13-c110nr USB/Card Reader Board Replacement: step 5, image 1 of 1

    • Turn the device over with the front facing towards you.

    • Open the device as shown.

    Edit

  6. HP Stream 13-c110nr USB/Card Reader Board Replacement: step 6, image 1 of 3 HP Stream 13-c110nr USB/Card Reader Board Replacement: step 6, image 2 of 3 HP Stream 13-c110nr USB/Card Reader Board Replacement: step 6, image 3 of 3

    • Insert the Spudger between the Top Cover and Bottom Cover to lift the front edge until it separates from the Bottom Cover.

    • Do not completely remove the Keyboard/Top cover from the Bottom cover yet.

    Edit

  8. HP Stream 13-c110nr USB/Card Reader Board Replacement: step 7, image 1 of 1

    • Disconnect the Touchpad cable.

    Edit

  9. HP Stream 13-c110nr USB/Card Reader Board Replacement: step 8, image 1 of 2 HP Stream 13-c110nr USB/Card Reader Board Replacement: step 8, image 2 of 2

    • Disconnect the Keyboard Cable.

    Edit

  10. HP Stream 13-c110nr USB/Card Reader Board Replacement: step 9, image 1 of 2 HP Stream 13-c110nr USB/Card Reader Board Replacement: step 9, image 2 of 2

    • Disconnect the Power connector cable.

    Edit

  11. HP Stream 13-c110nr USB/Card Reader Board Replacement: step 10, image 1 of 1

    • Remove the Keyboard/Top Cover from the device.

    Edit

  12. HP Stream 13-c110nr USB/Card Reader Board Replacement, Battery Assembly: step 11, image 1 of 2 HP Stream 13-c110nr USB/Card Reader Board Replacement, Battery Assembly: step 11, image 2 of 2

    • Use a pick to detach the Battery assembly cable.

    Edit

  13. HP Stream 13-c110nr USB/Card Reader Board Replacement: step 12, image 1 of 2 HP Stream 13-c110nr USB/Card Reader Board Replacement: step 12, image 2 of 2

    • Remove eight (8) Phillips P0 PM2.0x3.0 mm screws from Battery assembly.

    • Place eight (8) screws on magnetic mat for reassembly.

    Edit

  14. HP Stream 13-c110nr USB/Card Reader Board Replacement: step 13, image 1 of 1

    • Remove Battery Assembly from device.

    Edit

  15. HP Stream 13-c110nr USB/Card Reader Board Replacement, USB/Card Reader Board: step 14, image 1 of 2 HP Stream 13-c110nr USB/Card Reader Board Replacement, USB/Card Reader Board: step 14, image 2 of 2

    • Use a pick to disconnect the USB/Card Reader cable from the System Board.

    Edit

  16. HP Stream 13-c110nr USB/Card Reader Board Replacement: step 15, image 1 of 2 HP Stream 13-c110nr USB/Card Reader Board Replacement: step 15, image 2 of 2

    • Remove three (3) Phillips P0 PM2.0x3.0 mm screws.

    • Place three (3) screws on magnetic mat for reassembly.

    Edit

  17. HP Stream 13-c110nr USB/Card Reader Board Replacement: step 16, image 1 of 2 HP Stream 13-c110nr USB/Card Reader Board Replacement: step 16, image 2 of 2

    • Remove the USB/Card Reader board assembly from the device.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 178