Fix Your Stuff Community Store

HP Spectre x360 13-aw0xxx Speaker Replacement

Introduction

If the speakers on your HP Specter laptop are not working use this step by step guide to show you how to remove and replace them.

What you need

  1. HP Spectre x360 13-aw0xxx Speaker Replacement, Battery: step 1, image 1 of 2 HP Spectre x360 13-aw0xxx Speaker Replacement, Battery: step 1, image 2 of 2

    • Use two opening tools, one on either side of the battery plug, to slowly pull the plug straight out of its port.

    • Alternatively, use your fingernails.

    Edit

  2. HP Spectre x360 13-aw0xxx Speaker Replacement: step 2, image 1 of 2 HP Spectre x360 13-aw0xxx Speaker Replacement: step 2, image 2 of 2

    • Use a Phillips #00 screwdriver to remove the six 2.5 mm screws securing the battery.

    Edit

  3. HP Spectre x360 13-aw0xxx Speaker Replacement: step 3, image 1 of 2 HP Spectre x360 13-aw0xxx Speaker Replacement: step 3, image 2 of 2

    • Carefully lift the edge of the battery with an opening tool.

    • Lift the battery up and out.

    Edit

  5. HP Spectre x360 13-aw0xxx Speaker Replacement, Speaker: step 4, image 1 of 2 HP Spectre x360 13-aw0xxx Speaker Replacement, Speaker: step 4, image 2 of 2

    • Remove the 3 mm Phillips screws on the speaker(s) you wish to replace.

    Edit

  6. HP Spectre x360 13-aw0xxx Speaker Replacement: step 5, image 1 of 2 HP Spectre x360 13-aw0xxx Speaker Replacement: step 5, image 2 of 2

    • Remove the two 2 mm Phillips #00 screws located under the battery.

    • Repeat for the other speaker if necessary.

    Edit

  7. HP Spectre x360 13-aw0xxx Speaker Replacement: step 6, image 1 of 3 HP Spectre x360 13-aw0xxx Speaker Replacement: step 6, image 2 of 3 HP Spectre x360 13-aw0xxx Speaker Replacement: step 6, image 3 of 3

    • Use a small pry tool to lift up and disconnect the speaker cable from the motherboard.

    Edit

  8. HP Spectre x360 13-aw0xxx Speaker Replacement: step 7, image 1 of 2 HP Spectre x360 13-aw0xxx Speaker Replacement: step 7, image 2 of 2

    • Using the same pry tool lift up on the speaker housing and remove it.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 11

Past 30 Days: 31

All Time: 247