Introduction

This guide will show you how to pry open the screen and replace the Rear Facing Camera.

Secure the suction cup to the center of the screen. Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.
  • Secure the suction cup to the center of the screen.

  • Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.

Add Comment

Use the Spudger to disconnect the ribbon cable to the rear facing camera.
  • Use the Spudger to disconnect the ribbon cable to the rear facing camera.

Add Comment

Use the tweezers to pry the camera assembly away from the motherboard.
  • Use the tweezers to pry the camera assembly away from the motherboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Andrew Hall

Member since: 05/23/2016

322 Reputation

3 Guides authored

Team

IUPUI, Team 1-4, Renguette SU 2016 Member of IUPUI, Team 1-4, Renguette SU 2016

IUPUI-RENGUETTE-SU16S1G4

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 90