Skip to main content

Introduction

Back Removal.

Parts

No parts specified.

  1. Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up. Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.
    • Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.

  2. Loosen  the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand. Loosen  the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.
    • Loosen the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.

  3. MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now

    MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now
  4. Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.
    • Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.

  5. Remove the backplate by pulling it back towards you.
    • Remove the backplate by pulling it back towards you.

    • Small plastic tabs hold in the backplate, pull these up to remove it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Maxwell Snook

Member since: 10/01/2015

173 Reputation

1 Guide authored

Team

Cal Poly, Team 1-20, Maness Fall 2015 Member of Cal Poly, Team 1-20, Maness Fall 2015

CPSU-MANESS-F15S1G20

4 Members

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 30