Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

This guide will tell you how to replace the hard drive for HP ProBook 450 G3.

  1. The screw will not come out, after you unscrew it. Unscrew the  2.5 mm screw with PH00 screwdriver. Pull the cover off the computer using two hands.
    • The screw will not come out, after you unscrew it.

    • Unscrew the 2.5 mm screw with PH00 screwdriver.

    • Pull the cover off the computer using two hands.

  2. Unscrew the  all four 2.5 mm screws with the PH00 screwdriver.
    • Unscrew the all four 2.5 mm screws with the PH00 screwdriver.

    • Then carefully pull to the right the hard-drive. It should release from its container.

Jingyuan Zhang

Member since: 10/20/2017

578 Reputation

5 Guides authored

Team

View Statistics:

Past 24 Hours: 1

Past 7 Days: 18

Past 30 Days: 79

All Time: 8,939