Introduction

The power button panel is one of the easiest components to replace on th HP 4320t. It may need replaceing, if damaged, to insure proper working order.

Parts

No parts required.

Flip the laptop upside down and remove battery by pressing inward on the two latches holding the battery in. Flip the laptop upside down and remove battery by pressing inward on the two latches holding the battery in.
  • Flip the laptop upside down and remove battery by pressing inward on the two latches holding the battery in.

Unscrew the four (2.5 mm Phillips) screws (Use Phillips #0 Screwdriver). Unscrew the four (2.5 mm Phillips) screws (Use Phillips #0 Screwdriver).
  • Unscrew the four (2.5 mm Phillips) screws (Use Phillips #0 Screwdriver).

New Battery = Faster iPhone
Fix Kits starting at $16.99
Flip laptop over and open it.
  • Flip laptop over and open it.

Slightly push up while lifting up on the power button panel to release the panel.
  • Slightly push up while lifting up on the power button panel to release the panel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Joshua

Member since: 09/23/2014

76 Reputation

6 Guides authored

Team

USF Tampa, Team 9-5, Blackwell Fall 2014 Member of USF Tampa, Team 9-5, Blackwell Fall 2014

USFT-BLACKWELL-F14S9G5

4 Members

10 Guides authored

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 351