Introduction

By opening up the printer by unscrewing a few screws.This will allow you to take the wireless card out of it's socket and replace it.

Image 1/1: The wireless card is located on the left side of the printer if you are viewing it from the front.
  • Open the top of the printer as shown.

  • The wireless card is located on the left side of the printer if you are viewing it from the front.

Add Comment

Image 1/1:
  • Using the T9 Torx Security screwdriver bit, unscrew the 12 mm screw on the far left side on the top of the printer.

Add Comment

Image 1/1:
  • After unscrewing the screw, the left side will slide down revealing the wireless card.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Unscrew one 12mm screw and gently disconnect the wireless card from the motherboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Charles

Member since: 10/23/2014

242 Reputation

2 Guides authored

Team

Michigan Tech, Team 1-2, Lauer Fall 2014 Member of Michigan Tech, Team 1-2, Lauer Fall 2014

MTU-LAUER-F14S1G2

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 542