Introduction

Don't know how to remove your HP's keyboard? This guide shows you the steps to successfully remove your HP's keyboard to allow you to replace it.

Image 1/1: There should be a total of 22 screws.
  • Unscrew all screws on the back of the laptop.

  • There should be a total of 22 screws.

Add Comment

Image 1/2: Then remove the battery by pushing up on the battery release switch and pull the battery out. Image 2/2: Then remove the battery by pushing up on the battery release switch and pull the battery out.
  • Remove all the protective covers such as the ram protective cover.

  • Then remove the battery by pushing up on the battery release switch and pull the battery out.

Add Comment

Image 1/1: This piece will not come off.
  • Wedge open the top panel located above the keyboard.

  • This piece will not come off.

  • 5 screws should be visible under the lifted panel. Unscrew all screws attaching the keyboard to the laptop.

Add Comment

Image 1/1:
  • Once all the screws are taken out of the top portion of the keyboard, wedge open the keyboard on all sides of the keyboard.

Add Comment

Image 1/1:
  • Lift the keyboard and unplug it out of the socket.

Add Comment

Image 1/1:
  • You have successfully removed the keyboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sonny Sem

Member since: 10/11/2016

356 Reputation

3 Guides authored

Team

Texas Tech, Team 38-5, Bennett Fall 2016 Member of Texas Tech, Team 38-5, Bennett Fall 2016

TTU-BENNETT-F16S38G5

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 50