Introduction

Removing the RAM from this device is straightforward and requires little disassembly.

Slide the battery release latch towards you.
  • Slide the battery release latch towards you.

Add Comment

Pull up on the battery to remove it. Pull up on the battery to remove it.
  • Pull up on the battery to remove it.

Add Comment

Loosen the Phillips screw labeled ‘ram’ and lift the cover. Loosen the Phillips screw labeled ‘ram’ and lift the cover.
  • Loosen the Phillips screw labeled ‘ram’ and lift the cover.

Add Comment

Locate the green RAM card and find the metal tabs securing the card. Push outwards on the two tabs to release the card.
  • Locate the green RAM card and find the metal tabs securing the card.

  • Push outwards on the two tabs to release the card.

Add Comment

Carefully slide the card out at an upward angle away from the slot.
  • Carefully slide the card out at an upward angle away from the slot.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Allie Menard

Member since: 04/12/2011

697 Reputation

13 Guides authored

Team

Cal Poly, Team 24-56, Amido Spring 2011 Member of Cal Poly, Team 24-56, Amido Spring 2011

CPSU-AMIDO-S11S24G56

4 Members

13 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 5

Past 30 Days: 15

All Time: 5,619