Introduction

This guide will show you how to take apart your device, so you can take out the optical drive. You will then be able to replace the broken drive with a new one.

  1. Completely power down and unplug the device.
    • Completely power down and unplug the device.

    • Lay device flat on a soft surface upside down.

    Add Comment

  2. Slide the two latch locks for the battery to the outside.
    • Slide the two latch locks for the battery to the outside.

    • Remove the battery by sliding it straight back.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Slide the optical drive release latch on the bottom right side.

    Add Comment

    • Remove the optical drive from the computer.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kelsey

Member since: 10/13/2015

176 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 4

All Time: 133