Introduction

This guide will accomplish replacing the WiFi receiver in incidents of failure.

Parts

No parts required.

Begin by locating the smallest panel with one screw attaching it to the laptop computer.
  • Begin by locating the smallest panel with one screw attaching it to the laptop computer.

Add Comment

Remove the one screw holding the panel down, and the WiFi receiver will be revealed.
  • Remove the one screw holding the panel down, and the WiFi receiver will be revealed.

Add Comment

Black Friday
Broken doesn't stand a chance.
Remove the two screws that hold down the receiver.
  • Remove the two screws that hold down the receiver.

  • Gently slide the chip out of the socket.

Add Comment

Remove the two wires labelled AUX and MAIN from the chip. Remember where these were attached previously as it is important for proper functionality after the replacement.
  • Remove the two wires labelled AUX and MAIN from the chip.

  • Remember where these were attached previously as it is important for proper functionality after the replacement.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Adam Braga

Member since: 10/24/2016

230 Reputation

2 Guides authored

Team

UMass Dartmouth, Team 2-7, Isaacson Fall 2016 Member of UMass Dartmouth, Team 2-7, Isaacson Fall 2016

UMASSD-ISAACSON-F16S2G7

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 20