Introduction

Use this guide to replace the Hard Drive in the Pavilion Dm4.

Parts

No parts required.

Image 1/2: Image 2/2:
  • Unlock and remove the battery pack.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Unscrew the hidden screws covered by the battery pack and remove the panel to find more hidden screws.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Unscrew the hidden screws in order to remove the hard drive cover.

Add Comment

Image 1/1:
  • Pull out the tab to remove the hard drive.

Add Comment

Image 1/3: In order to disconnect the hard drive, grab the hard drive and cord then gently pull the hard drive away from the cord. Image 2/3: In order to disconnect the hard drive, grab the hard drive and cord then gently pull the hard drive away from the cord. Image 3/3: In order to disconnect the hard drive, grab the hard drive and cord then gently pull the hard drive away from the cord.
  • Take the hard drive out and pull the connector from it.

  • In order to disconnect the hard drive, grab the hard drive and cord then gently pull the hard drive away from the cord.

Add Comment

Image 1/1: Do not take apart the hard drive if you want it to run anything at all!
  • Replace the hard drive.

  • Do not take apart the hard drive if you want it to run anything at all!

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Wyatt Marsalek

Member since: 06/01/2016

104 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 20

Past 30 Days: 84

All Time: 652