Skip to main content

Introduction

This replacement guide will show how to replace the Motherboard of an HP Pavilion 15-b109wm. This process will take between 25-35 minutes, if done correctly. Remember to take your time and do the steps correctly and gently to avoid parts breakage.

For this guide you will need a heavy-duty spudger, a JIS driver set and an iFixtit opening tool. Some parts of this guide require some force to pop open, be careful not to brake or damage any parts when applying force.

  1. Disconnect the cables to the motherboard. Disconnect the cables to the motherboard. Disconnect the cables to the motherboard.
    • Disconnect the cables to the motherboard.

  2. Remove the hard drive. Remove the hard drive.
    • Remove the hard drive.

  3. Unclip the WLAN cable out of its place to allow the motherboard room to move. Unclip the WLAN cable out of its place to allow the motherboard room to move.
    • Unclip the WLAN cable out of its place to allow the motherboard room to move.

  4. Detach the power connector cable. Detach the power connector cable.
    • Detach the power connector cable.

  5. Remove the motherboard from the device. Remove the motherboard from the device.
    • Remove the motherboard from the device.

Conclusion

To reassemble your device work in the reverse order, make sure all the screws are in their required hole before assembling the next part.

Enrico Miozzo

Member since: 11/07/2019

220 Reputation

2 Guides authored

Team

IUPUI, Team S2-G4, Harley Fall 2019 Member of IUPUI, Team S2-G4, Harley Fall 2019

IUPUI-HARLEY-F19S2G4

3 Members

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 134