Introduction
This is the guide to removing the back panel to the HP Pavilion 14-bk061st.
The back cover’s purpose is to close up the device and stop debris from entering and possibly damaging the critical components of the device. If the back cover is broken, be very careful when moving the device as debris may easily enter and damage the laptop’s components, leading to a costly repair.
What you need
-
-
Remove the three 5.7 JIS #1 screws from the bottom of the laptop.
-
Remove the two 6.7mm JIS #1 screws from underneath the feet of the laptop close to the exhaust vent.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
York University, Team S8-G3, Turner Winter 2020 Member of York University, Team S8-G3, Turner Winter 2020
YORK-TURNER-W20S8G3
4 Members
11 Guides authored
